NTI SUBMITTALS

TRIN & STOR “ V ” SERIES SUBMITTAL Section 1 – General Specifications Section 2 – Product Dimensions

THE FUTURE OF HOME HEATING

Project Name: _______________________________________________ Date: _______________________________ Location: _______________________________________________________________________________________ Engineer: _______________________________________________________________________________________ Contractor: __________________________________________________ Rep: _______________________________

1 – GENERAL SPECIFICATIONS

Product Features:

Factory Supplied Items

Relief Valve, T&P, 3/4”, 150 psi Tank Sensor

Tank is constructed out of Type 444 Stainless Steel Coil is constructed out of Type 316L Stainless Steel Tanks are 100% pickled and passivated (inside and outside) to regenerate the chromium oxide layer, an extremely important process for corrosion resistance Fittings are constructed out of Type 316L stainless steel Maximum operating pressure 150 psi Insulated with 2 inch thick Expanded Polyurethane Foam (R value > 9) Painted metallic outer shell with high quality look and feel 3/4 ” female NPT temperature and pressure relief valve connection Stainless steel well for insertion of Tank Sensor or Aquastat 1- 1/2” cleanout/inspection ports on top and side Recirculation connection

Tank Sensor Features

Incorporates a 10K thermistor and a UL353 rated normally closed safety switch Connects directly to any NTI gas-fired boiler Allows the tank temperature to be controlled from the boiler

Indirect Water Heater Specifications

Coil Flow Rate (GPM)

Hour 1 Recovery 2 (USG @ Outlet Temp)

Continuous Rate 2 (GPH & Outlet Temp)

Storage Capacity (USG)

Boiler Output (MBH)

Coil Drop (Feet)

Weight (lbs)

Model

Type

Empty Filled 1

140º F

115º F

140º F

115º F

V40

38

95

428

216

319

160

10

1.6

182

287

V50

51

117

556

251

373

180

10

2.0

211

333

Stainless Steel Indirect

V65

64

134

690

334

485

240

15

3.8

277

433

V80

77

165

835

384

558

300

15

5.1

314

492

V120

116

232

1235

489

717

350

20

10.0

390

616

Notes: 1 Ensure the location chosen for installation can support the weight of the tank when filled with water. 2 Ratings based on 50ºF inlet water temperature and 200ºF boiler water outlet temperature.

Recommended Service Clearances [in]

Restrictions

Top

12

MAWP

150 psi

Connection Side

12

Max Tank Temp

190º F

Boiler Connections

As required

Max Boiler Temp

210º F

NTI Boilers Inc. NTI Boilers Inc. 30 Stonegate Drive, Saint John, NB E2H 0A4 Canada Technical Service: 1-800-688-2575 Fax: 1-506-432-1135 Web: http:// www.ntiboilers.com NTI Boilers Inc. reserves the right to change these specifications without notice 2022-07-12 | Rev.0